9705 - Operating the 9705 55 of 82
KSS - March 2006 - Edition 1
HIAC Operator Manual
4 Operating the 9705
The Model 9705 Liquid Particle Counting System operates as both particle counter and
sampler in one self-contained unit.
4.1 Touch Screen Familiarization
The touch screen of the 9705 is divided into three sections as shown in Figure 4-1.
• The upper left corner of the screen contains any notes given on a sample. The arrow
keys to the right of the notes field allow scrolling through the notes.
• The upper right corner of the screen shows the current settings for:
• Sample volume
•Flow rate
• Number of runs
• Dilution factor
• The lower half of the screen shows the particle sizes being monitored and either the
current count or the last count taken. The arrows to the right allow scrolling to see all
sizes and counts, if necessary.
• The status of the 9705 is shown at the bottom of the screen, running a sample or sample
stopped.
The icon bar allows access to these functions:
Fig 4-1 : Main Screen
• Run/stop sampling • Flush system
• Swirling • Configure settings
• Check system diagnostics • Print sample results
• Lock or unlock system security
To Next Page
Loading...
