Hach HIAC 9705 - Setting Backlight Timeout

9705 - System Setup 29 of 82
KSS - March 2006 - Edition 1
HIAC Operator Manual
3) Use the backspace key to delete any unwanted text in the field. Enter the flow rate.
N
o
t
e:
If an invalid entry is made, a pop-up window appears to prompt an entry between 10 and
60 mL. Touch OK to close this window and return to the Flow Rate Entry screen.
4) Press Enter to save changes and return to the Syringe Settings screen.
5) Press the Return icon to return to the main screen.
3.7 Setting Backlight Timeout
1) From the Main Screen, select the Setup icon > System icon to invoke the System
Settings screen, shown in Figure 3-8.
Fig 3-7 : Syringe Settings Screen
Fig 3-8 : System Settings Screen