Page 9
2 Installation
This section contains helpful information about how to install your Braille Wave. Please
read it carefully to prevent difficulties while setting up.
2.1 Package Contents
Please verify that your package contains all of the parts listed below. If one of the
components is missing or damaged, please contact us in order to request the missing part
or a replacement.
You should find enclosed the following:
Braille Wave,
Carrying case with adjustable shoulder strap,
2 Interface cables for data transfer with PC (one short, one long),
Power supply with power cable (100 to 240 Volt AC; 9 Volt DC / 1,5 A; FW
7555M/09),
Set of 4 NiMH batteries (inside device, with insulating strip),
Software Package with drivers for screen readers and HTCom (one CD),
2 Keyboard pads (styrofoam boards, each with one edge notched),
This user manual, printed version,
This user manual in daisy format on CD,
User manual for file transfer with HTCom and HTDrive,
Quick Reference in Braille.
If the Braille Wave is Bluetooth capable:
Bluetooth USB adapter for the PC, with pairing code in Braille and printed
2.2 Software Installation
Before you can connect the Braille Wave to your computer, you should first install the
enclosed software package. Please make sure that the screen reader program you intend
to use has been installed on the PC and close Word for Windows. Next, insert the CD
containing the installation software into your computer's CD-ROM drive. The installation
program of this CD will install the latest drivers for your screen reader as well as the file
transfer programs HTCom and HTDrive and this user manual.
Start "setup.exe" on the CD. The installation program follows the Windows Standards. You
can choose the following components of the software, to be installed:
JAWS driver: latest Braille display driver for JAWS for Windows
Window-Eyes driver: latest Braille display driver for Window-Eyes
HAL/Supernova driver: latest Braille display driver for HAL/Supernova
Braille Wave Firmware and Manuals: for updating the internal functions of your
Braille Wave and this user manual.
Handy Tech Communication Software: communication program for file transfer
between PC and Braille Wave
To Next Page
Loading...
Need help?
General