Page 89
with a default repeat interval of 500 milliseconds if you activate key repeats. There is no
key repeat available for Braille input.
8.5 Miscellaneous
Under the tab "Miscellaneous", you can specify whether your actions should be tracked in
a protocol file. This function is available in case you enlist Technical Support. Please
check this box only when asked to do so by your customer service representative. You will
then also be able to specify where this protocol file should be saved, in the field called
"Protocol file".
The check box "Quick Entry in PC mode by Dot 7 as Back Space and Dot 8 as Enter"
results in the [7] key functioning like a Backspace key during Braille input, and the [8] key
as Enter. If you want to disable this option, you can do so by unchecking this box, which is
checked by default.
8.6 Info
In the ”Info“ tab sheet you find important information about your Braille System and the
driver software, you are using.
In the field ”Active Braille display“ you find the type of Braille display, you are using, as well
as the interface it is connected to and the serial number of your Braille display. In addition
you find a reference when the next recommended maintenance of your Braille display is
due.
In the field “Driver properties” the type of screen reader, you are using is listed, as well as
the version of your driver.
At “Your dealer” you get the contact details of your Handy Tech dealer with postal address,
telephone number and E-mail.
To Next Page
Loading...
Need help?
General