Hasler Sound 2 - CE Identification Plate; Figure 7: CE Identification Plate

Description and principle of operation
Page 19 / 64
Iss. a – Translation of the original version
2024/01/05
Doc. Ref. : SOUND2.940.001
Characteristics
Values
− Insulation voltage:
2,500 V
Isolation of these outputs
2,500 V
Specifications of digital output 3 (7-8) on
terminal block J2:
− Maximum switching current:
− Maximum switching voltage:
− Contact resistance:
− Insulation voltage:
120 mA
350 V
35 Ω max
2,500 V
Unit dimensions:
− Width:
− Height:
− Depth:
256.1 mm
270 mm
118 mm
Temperature:
− operating temperature
− storage temperature
-10°C to +50°C (no condensation)
-30°C to +70°C
Ingress protection:
IP65
Altitude (max)
3,000 m
Humidity
95 % maximum at 25 °C with no condensation
Weight
2,900 g
2.5.2. CE identification plate
An identification plate is located on the right-hand side of the equipment.
Figure 7: CE identification plate
This plate must be kept in good condition. HASLER Group will need the information given on this
plate when you order spare parts.
The serial number of the board must be written in the following form:
− S.N. m-xxx-yyzz, with:
• m: Manufacturer code (ask R&D Hasler)
• xxx: Unique incremental number.
• yy: Production week.
• zz: Production year.
ZI de l'ABBAYE - 496 rue Louis Bréguet
38780 Pont-Evêque - FRANCE
Tel : +33 (0)4 74 16 11 50
Type
S/N M-XXX-YYZZ
20ZZ
P/N
https://hasler-gp.com
Power Supply
Year
88 / 264 VAC 47 - 63Hz 0,7A/0,4A
IP 65
SOUND 2
2520.0010