Hasler Sound 2 - System Menu: General and Security Settings

Use – Operation
Page 39 / 64
Iss. a – Translation of the original version
2024/01/05
Doc. Ref. : SOUND2.940.001
1. Press the “Menu” key .
2. Select the “System” menu and press Enter.
3. Select the “General” menu and press Enter. The following screen is displayed:
Figure 30: “System\General” menu
Select “Date” or “Time” to set the date and time of the SOUND2.
6.5.2.2. “Security” submenu
To go to this submenu:
1. Press the “Menu” key .
2. Select the “System” menu and press Enter.
3. Select the “Security” menu and press Enter. The following screen is displayed:
Figure 31: “System\Security level” menu
This menu shows the current security level/profile: Operator or Maintenance.
Login profile/security level
The login profiles/security levels provide access to certain menus that are restricted to authorised persons.
There are two login profiles (Operator/Maintenance):
− The “Operator” profile has access to the production menu (see table below).
− The “Maintenance” profile has full access to the menus dedicated to production and configuration
(depending on the ADVANCED or PREMIUM configuration) of the SOUND2 (see the table in section
2.3
page 18).