Iss. a – Original Instruction Manual
Doc. Ref. : SOUND2.940.001
− Parameter 4
Each of these parameters corresponds to one of the parameters displayed on the main screen as follows:
Figure 50: Definition of the parameters on the main screen
For each parameter, the following characteristics are available:
− Average Power
− Maximum frequency
− Maximum power
− Bandwidth
− Mixture type
− Filling level
− Noise level (“Noise_Level”)
− Lower Threshold
− Upper Threshold
− Frequency
− Measured P1
− Measured P2
− No characteristic
3. Select the type of characteristics to be displayed for the 4 parameters.
4. Press the “Home” button and the main screen will display the chosen parameters.
8.6.9.2. “Parameters” submenu
To go to the submenu,
1. Select the “Parameters” menu and press Enter. The following screen is displayed:
Figure 51: “System\Parameters” menu
To Next Page
Loading...