Hasler Sound 2 - Software Versions and Alarm Menu

Page 40 / 64
Use – Operation
Iss. a – Translation of the original version
2024/01/05
Doc. Ref. : SOUND2.940.001
Menus
Alarm
Parameters
Measurements
Calibration
Cross Talk
Outputs
System
Diagnostics
Security
level:
Operator
√
√
√
√
Changing profile
To change the login profile, on the “Security level” screen:
1. Press the Enter key.
2. Enter the password 1000 (default): use the contextual selection keys to select the thousands digit, then
use the Up and Down keys to display 1 for the thousands digit.
Figure 32: Changing profile
3. Press the Enter key. A screen is displayed showing the current profile or function and the new
profile/function.
4. Use the Up and Down keys to select the desired profile level, then press the Enter key to confirm.
5. Go back to the main screen .
6.5.2.3. “Software versions” submenu
This submenu shows the different software versions for the boards.
To go to this submenu:
1. Press the “Menu” key .
2. Select the “System” menu and press Enter.
3. Select the “Software versions” menu and press Enter. The following screen is displayed:
Figure 33: “System\Software versions” menu