Hasler Sound 2 - Calibration Menu Functions

Use – Operation
Page 43 / 64
Iss. a – Translation of the original version
2024/01/05
Doc. Ref. : SOUND2.940.001
6.5.5. “Calibration” menu
This menu is used to go to the “Calibration State” screen. See section
5.6 page 32 for more information.
Clear Calibration
This function is used to delete one or all of the calibration points.
1. Select the “Clear Calibration” submenu and press Enter.

Figure 38: “Actual Measures” submenu
Parameter
Description
Calib. N° Point
Corresponds to the calibration point.
Calibrated Level
Corresponds to the level of the calibration points.
Clear Calib. Point
Clears the selected calibration point.
Clear all Calib. Points
Clears all the calibration points.