Hasler Sound 2 - Figure 52: System\Security Menu; Figure 53: Changing the Maintenance Password

Page 60 / 64
Maintenance
Iss. a – Original Instruction Manual
2024/01/05
Doc. Ref. : SOUND2.940.001
Parameter
Description
File system
Explores the file system memory
Card insert
Message displayed if no SD card is inserted.
Import config from
card
Message displayed if an SD card is inserted.
Imports all SOUND2 parameters from the SD card
Export config to card
Message displayed if an SD card is inserted.
Exports the SOUND2 parameters to the SD card
File system explorer
Message displayed if an SD card is inserted.
Explores the SD card file system.
8.6.9.3. “Security” submenu
To go to the submenu,
1. Select the “Security” menu and press Enter. The following screen is displayed:
Figure 52: “System\Security” menu
Parameter
Description
Security level
Indicates the current profile/security level: Operator or Maintenance.
See section
Changing profile page 40 to change profile.
Password
Changes the password. The current value must be known in order to access
the modification page.
Command Origin
Identifies who is operating the equipment and who has the right to handle it.
Com. Orig. Config.
Configures the access rights based on the profile.
Changing the password
1. Select "Password" then press the Enter key
2. On the screen that is displayed, enter the current password (see
Changing profile page 40).
3. On the new screen that is displayed, enter the new password value and press the Enter key to confirm.
Figure 53: Changing the “Maintenance” password