HBM MP85A - Page 104

Communication with a control system
104 A0293_06_E00_03 HBM: public MP85A
Name structure of curve file Directory structure
Workpiece ID
59 characters
ID, 59
characters
MP85A ID
Factory ID
Factory-set MP85A ID:
PS/counter/CAN/Ethernet ID
CAN bus
PROFIBUS
Ethernet
PME Assistant,
manually
Subdirectory,
32 characters
Profinet
CAN bus
PROFIBUS
Ethernet
PME Assistant,
manually
Profinet
..\\data\
Important
A control system or master with DPV1 functionality is required for transfer via
PROFIBUS. You can find out more about the required objects in the MP85A
process controller interface description.
To enable process curves and results to be saved on the PC or server, you
must launch the software, e.g. PME Assistant, INDUSTRYmonitor or EASY
monitorCE (HBM software for industrial use).