HBM MP85A - Introduction; About this Documentation; Scope of Supply

Introduction
14 A0293_06_E00_03 HBM: public MP85A
3 Introduction
3.1 About this documentation
The MP85A process controller documentation comprises:
S This operating manual.
This mainly describes setting up the hardware (transducer, device and PC
with software).
S The online help features of the PME Assistant and the add-on software
modules.
These tools describe device setup and function using the software.
S A quick start guide for fast startup of the MP85A process controller and all
software modules.
S A separate operating manual with an object dictionary and an interface
description for Ethernet, CAN bus, PROFIBUS and Profinet communication.
S A quick start guide for the entire FASTpress suite, i.e. for all software
modules and the MP85A process controller.
3.2 Scope of supply
S 1 MP85A, MP85ADP or MP85ADP-PN and/or MP85A‐S, MP85ADP‐S or
MP85ADP-PN-S
S 4 plug-in screw terminals, coded
Phoenix order number HBM order number
1x power supply and CAN,
6-pin
MV STBW 2.5/6‐ST‐5.08 GY 3‐3312.0426
2x transducers, 8-pin MCVW 1.5/8‐ST‐3.81 GY 3‐3312.0422
1x I/O 1, 8-pin MC 1.5/8‐ST‐3.5 GY 3‐3312.0421