Markings used
MP85A A0293_06_E00_03 HBM: public 13
Pay attention to the supply voltage
This symbol indicates that the supply voltage must be
between 18 and 30V
DC
.
Statutory waste disposal marking
In accordance with national and local environmental
protection and material recovery and recycling
regulations, old devices that can no longer be used must
be disposed of separately and not with normal household
garbage. Also see section 15, page 154.
Battery disposal
In accordance with national and local environmental
protection and material recovery and recycling
regulations, old batteries that can no longer be used
must be disposed of separately and not with normal
household garbage.
ESD marking
Electrostatic discharges in the area of the MMC/SD card
can lead to malfunctions or failure of the device. Touch a
grounded metal component before touching the device in
this area.
To Next Page
Loading...
