Starting up/Setup mode
70 A0293_06_E00_03 HBM: public MP85A
7.7 Offline mode
In offline mode, you can use the PME Assistant without an MP85A process
controller to create a device setting (parameter set) and save it to a PC in XML
format. You can then import this device setting to the MP85A process con
troller later on.
Starting offline mode:
► Launch the PME Assistant.
► Select the “Offline” interface.
► Select the required device type from the device list.
► Click the “Start” button to launch the Assistant.
You can now make device settings without an MP85A process controller being
connected. In the “Save/Load parameters” menu, you can save the settings to
your PC or load existing settings for viewing and further processing.
To Next Page
Loading...
