HBM MP85A - Page 69

Starting up/Setup mode
MP85A A0293_06_E00_03 HBM: public 69
New functions are often implemented via firmware and can then be copied onto
existing devices.
Important
The device settings remain unchanged when the firmware is updated. Never
theless, we recommend saving all your settings on the PC via the PME Assis
tant before an update.
With the program, you can also simultaneously transfer a new firmware version
to several devices. To prevent conflict with ongoing processing (no measure
ments or evaluations can take place during an update), from firmware version
2.22 or higher you can stipulate that firmware updates should go ahead only
following manual confirmation on the device (F Update: Permitted!). If confir
mation does not occur within 15 minutes, no changes are made to the
firmware.