Starting up/Setup mode
68 A0293_06_E00_03 HBM: public MP85A
7.5 Automatic version detection
If the system detects
MP85A process controllers
that use firmware that is not
fully compatible with your
version of the PME
Assistant, the following
message appears:
You can find out the device firmware via the display of the MP85A, the PME
Assistant or the INDUSTRYmonitor program.
The latest PME Assistant is always compatible with all MP85A process con
trollers. You can find the latest software and firmware versions on the HBM
website: www.hbm.com -> Services & Support -> Downloads -> Firmware &
Software.
7.6 Firmware updates
The firmware update program is installed using the supplied system CD. The
latest program and firmware versions can also be found on the HBM website:
www.hbm.com -> Services & Support -> Downloads -> Firmware & Software.
To Next Page
Loading...
