Safety instructions
MP85A A0293_06_E00_03 HBM: public 11
This can be achieved by mechanical interlocking, error signaling, limit value
switches, etc.
The performance and scope of supply of the device cover only a small
proportion of test and measuring equipment. Before starting up the device in a
plant, first perform a project planning and risk analysis, taking into account all
the safety aspects of measurement and automation engineering, to minimize
residual risk. This particularly concerns the protection of personnel and
equipment. In the event of a fault, appropriate precautions must produce safe
operating conditions.
General dangers of failing to follow the safety instructions
This is a state-of-the-art device that is safe to operate. However, there may be
residual risks if the device is installed or operated incorrectly.
To Next Page
Loading...
