HBM MP85A - Page 142

FAQs: Frequently asked questions (MP85A and PME Assistant)
142 A0293_06_E00_03 HBM: public MP85A
LED 2 (status)
LED 2 (status)/MP85A
device status
Red LED Yellow LED Green LED LED
flashes
Initialization after device is
switched on
X
One of the following errors is
present:
EEPROM error, initial cali
bration error, scaling error,
MMC/SD error or CAN bus
error
X
Transducer error, ADC over
flow or gross overflow (one
or both measurement
channels)
X X
LCD error X X
CAN bus: Transmit/receive
data
X X
“Pre-operational” state X
“Operational” state X
MP85ADP only: PROFIBUS status
MP85ADP PROFIBUS
status
Red LED Yellow LED Green LED LED
flashes
Error state X
States
BD_SEAR,WT_PARM,
WT_CONF
X
DATA_EX status X