Safety instructions
MP85A A0293_06_E00_03 HBM: public 9
Operating conditions
S Protect the device from direct contact with water.
S Protect the device from moisture and weather conditions such as rain or
snow. The device has an IP rating of IP20 (DIN EN 60529).
S Do not expose the device to direct sunlight
S Comply with the maximum permitted ambient temperatures and the data on
maximum humidity as stated in the specifications.
S The design or safety features of the device must not be modified without
our express consent. In particular, any repair or soldering work on
motherboards (replacement of components) is prohibited. When exchanging
complete modules, use only genuine parts from HBM.
S The device is delivered from the factory with a fixed hardware and software
configuration. Changes can only be made within the range of possibilities
described in the corresponding documentation.
S The device is maintenance free.
S Please note the following points when cleaning the housing:
- Disconnect the device from all current and voltage supplies before
cleaning it.
- Clean the housing with a soft, slightly damp (not wet!) cloth. Never use
solvent as this could damage the label or housing.
- When cleaning, ensure that no liquid gets into the device or connections.
S In accordance with national and local environmental protection and material
recovery and recycling regulations, old equipment that can no longer be
used must be disposed of separately and not with normal household
garbage, see section 15, page 154.
Qualified personnel
Qualified persons are individuals entrusted with the installation, fitting, startup
and operation of the product and with the relevant qualifications for their work.
This includes people who meet at least one of the three following criteria:
To Next Page
Loading...
