HDG Pelletmaster 15 - Switching the Heating System off; Displaying Information; Selecting and Changing Parameters

6 Using the heating system – Switching the heating system off
112
6.3 Switching the heating system off
1. Press the Mode button repeatedly until the OFF symbol flashes.
✓ OFF has been preselected.
2. Press the Enter button.
✓ OFF mode has been confirmed.
✓ The OFF symbol lights up.
✓ The heating system switches to OFF mode.
6.4 Displaying information
You can call up a variety of information on the display of the HDG
Pelletronic control unit.
✎ See section “6.10 Structure of the menus” in this chapter.
1. Press the Down button.
✓ The display will change to the next item of information.
2. Press the Up button.
✓ The display will change to the previous item of information.
3. Press the Menu button (more than once, if necessary).
✓ The standard display of i-01 is shown.
6.5 Selecting and changing parameters
On the HDG Pelletronic control unit, various parameters can be
selected and altered.
✎ See section “6.10 Structure of the menus” in this chapter.
Caution!
Frost danger!
Only switch off the heating system completely if you are certain
there is no danger of frost.
Enter
In this mode, only the protective programmes are active.
There is still electrical voltage in the system.
Menu