113
SELECTING A LEVEL
Select the required level as follows:
C
USTOMER LEVEL 1. Press the Enter button.
✓ The customer level is shown on the display.
or
S
ERVICE LEVEL
1. Simultaneously press the Plus and Enter buttons.
✓ The service level is shown on the display.
S
ELECTING PARAMETERS
2. Use the arrow buttons to select the desired parameter group.
3. Press the Enter button.
4. Select the parameter to be changed.
5. Press the Up or Down button.
✓ The display will change to show the previous or the next
parameter.
6. Repeat the procedure until the parameter to be changed is shown
on the display.
✓ The parameter to be changed is shown on the display.
C
HANGING PARAMETERS 7. Press the Enter button.
✓ The cursor will flash underneath the first parameter.
✓ The value displayed can be changed.
8. Press the Plus or Minus button.
✓ The value of the parameter is increased or decreased.
9. Press the Up or Down button.
✓ The cursor will jump to the next digit.
10.The Plus or Minus buttons can be used to change the value.
11.Press the Enter button.
✓ The changed value is confirmed.
✓ The selected parameter has been changed.
12.Press the Menu button repeatedly until the information level is
shown on the display
✓ The standard display of i-01 is shown.
To Next Page
Loading...