EasyManua.ls Logo

HDG Pelletmaster 15 - Page 162

Default Icon
172 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8 Troubleshooting – Possible faults
162
F055 Short circuit in
lower boiler
temperature
sensor
• Short circuit in sensor or in
cable
• Both sensor connections
joined in a single terminal
• Have the fault fixed by a
qualified electrician
F056 Open circuit in
temperature
sensor for oil-
fired boiler
• Sensor not connected
• Sensor is faulty
• Have the fault fixed by a
qualified electrician
F057 Short circuit in
temperature
sensor for oil-
fired boiler
• Short circuit in sensor or in
cable
• Both sensor connections
joined in a single terminal
• Have the fault fixed by a
qualified electrician
F058 Open circuit in
temperature
sensor for solar
collector
• Sensor not connected
• Sensor is faulty
• Have the fault fixed by a
qualified electrician
F059 Short circuit in
temperature
sensor for solar
collector
• Short circuit in sensor or in
cable
• Both sensor connections
joined in a single terminal
• Have the fault fixed by a
qualified electrician
F060 Open circuit in
temperature
sensor for
district heating
• Sensor not connected
• Sensor is faulty
• Have the fault fixed by a
qualified electrician
F061 Short circuit in
temperature
sensor for
district heating
• Short circuit in sensor or in
cable
• Both sensor connections
joined in a single terminal
• Have the fault fixed by a
qualified electrician
F062 No. of IO module
too high or
already exists
• Customer no. of heating
circuit module and control
system differ
• Call HDG service
F063 Heating circuit
module 0 ADC
fault
• Analogue to digital converter
is faulty
• New heating circuit control
F064 Heating circuit
module 0 Fault
in 0-throughput
• Speed-controlled output is
faulty
• New heating circuit control
F075 Heating circuit
module 1
is not connected
• Power supply has failed
• Bus cable is not connected
• Bus cable is fitted the wrong
way around
• Check the power supply
• Have the fault fixed by a
qualified electrician
No. Fault Cause Remedy
Table 8/1 - Faults (continuation)

Table of Contents