68
INSTALLING HOT WATER AND
BUFFER TANK SENSORS
3. Make sure that the sensors for buffer and hot water tanks are not
bent.
4. Carefully insert the buffer and hot water tank sensors into the
immersion sleeves.
I
NSTALLING A ROOM SENSOR
Figure 4/54 - Sensors for buffer and hot water tanks
1. Fasten the room sensor at its
intended position on the wall.
✎ See section “4.2 Connections”
in this chapter.
Figure 4/55 - Room sensor
Figure 4/56 - Room sensor without cover
To Next Page
Loading...