175
No Connection to
Server
1
FIGURE 8-10
When the data transfer process is being
activated, but the connection is not
established successfully, FIGURE 8-10 will be
displayed.
One of the following errors has occured:
- The Docking Station is not properly
connected to the network.
- The network server is not available.
- There is a fault in the Docking Station.
a) Press the Confirm button(2) to return to
the Main Menu, FIGURE 2-24.
1 Confirm button
Communication
Error
E31
2
FIGURE 8-11
If, during data transfer, an error or
malfunction between the Analyzer and the
recieving computer is detected, FIGURE 8-11
will be displayed. Refer to the section 8 Data
communications.
a) Press the Confirm button(2) to return to
the Main Menu, FIGURE 2-24.
2 Confirm button
To Next Page
Loading...
