68
Operator ID requirement
Not UsedNot Used
Entry RequiredEntry Required
Approved OnlyApproved Only
2
3
1
FIGURE 3-47
When the Operator ID button is pressed in
the General Settings menu (see FIGURE
3-46), the settings for Operator ID
requirement are displayed.
The options available are displayed as
buttons(1). The option currently in use is
indicated by the selected Radio button(2).
Not Used: The Operator ID cannot be
entered at startup. An Operator may perform
all functions except the password protected
functions (see FIGURE 4-49).
Entry required: An Operator ID must be
entered at startup. Any operator not verified
against the Operator List will be considered
as belonging to the “user” category (see
FIGURE 3-22).
Approved Only: An Operator ID must be
entered at startup. Any operator not verified
against the operator list will be denied
access to the Analyzer.
The Approved Only function will provide
optimal operator traceability.
a) To change the setting, press the button
for the desired option(1).
b) Press the Confirm button(3).
1 Options for Operator ID requirement
2 Selected option
3 Confirm button
To Next Page
Loading...
Need help?
General
