82
STAT Test usage
UsedUsed
Not UsedNot Used
STAT Test
3
1
2
FIGURE 3-62
When the STAT button is pressed in the
Patient Test Settings menu (see FIGURE
3-55), the settings for STAT Tests are
displayed.
The options available are displayed as
buttons(1). The option currently in use is
indicated by the selected Radio button(2).
Used: STAT tests are permitted even when
the Analyzer has performed a QC lockout.
Not Used: STAT tests are not permitted.
a) To change the setting, press the button
for the desired option(1).
b) Press the Confirm button(3).
1 Options for STAT test usage
2 Selected option
3 Confirm button
To Next Page
Loading...
Need help?
General
