Page 6-4 Work Instruction Wizard
PLT-01067, Version: A.7 July 2017
4. Define Format Parameters: You select, then customize each parameter defined for the selected
format. Select the line to modify. Each parameter is editable with text or from a drop-down
menu.
Auto Number Sequences window
Select Add Range and set the range in the editable fields. Click OK.
5. Click Next to continue with the Wizard.
Field Description
Name
The name is read from the Format file. It is recommended to not change this
name unless necessary.
Parameter Type
This can be Auto Increment, Static, or Manual User Entry.
Note: Type is typically determined by the Format file.
Enforce Unique
Numbers
Check this box for a runtime check of manual value entered by user to
guarantee uniqueness, prior to executing the Work Order.
Default Value The default Static value is used when auto-creating a new Credential record.
Increment Step The step value used to increment Auto Number sequences.
Auto Numbers
This field sets the Auto Number Sequences for the Work Instruction. The ranges
are set by selecting the ellipses (…) and entering the ranges (see following
graphic).
To Next Page
Loading...