What to do if an error occurred attempting to update the MIFARE Application Directory (MAD) in HID CP1000?
If an error occurred attempting to update the MIFARE Application Directory (MAD), verify that the MAD sector (0) on the target card has not already been written to by another application with non-MAD data.
What to do if credential counters have been exhausted for given technology in HID CP1000 Media Converter?
If the credential counters have been exhausted for a given technology, contact Tech Support to purchase additional credential credits.
What to do if an error occurred attempting to write SR data to an SE card in HID CP1000?
If an error occurred attempting to write SR data to an SE card, present the correct iCLASS SE card to the encoder.
General| Category | Media Converter |
|---|---|
| Model | CP1000 |
| Fiber Ports | 1 |
| Fiber Connector | SC |
| Data Transfer Rate | 10/100 Mbps |
| RJ45 Ports | 1 |
| RJ45 Speed | 10/100 Mbps |
| Operating Temperature | 0°C to 50°C |
| Power Supply | External |
| Weight | 0.2 kg |
Explains core concepts for using the iCLASS SE Encoder, including key management and administration.
Details the purpose and types of media keys used for authenticating credentials during read/write operations.
Describes Secure Object (SO) technology and its enhanced security features for credentials.
Allows users to define and save encoding profiles for credential deployment.
Enables users to view and manage HID and Custom Keys within the encoder.
Used to create Reader Data configuration cards for keys and reader settings.
Allows administrators to create users and set their access permissions.
Lists the necessary hardware and software specifications for the iCLASS SE Encoder Desktop application.
Requires Administrator privileges for installation and startup procedures.
Provides initial setup steps, including connecting the encoder and installing the software.
Guides through changing default administrative keys for enhanced security during setup.
Emphasizes modifying default admin credentials immediately for security.
Describes how to load credential credits and HID keys onto the encoder via a USB flash drive.
Introduces the Work Order Manager module for creating, managing, and executing Work Orders.
Details toolbar functions for managing Work Orders like Open, Save, Edit, and Execute.
Details the process of creating a new Work Order, selecting technology, and defining instructions.
Describes adding a Work Instruction, which is a single routine for encoding.
Covers the process of executing a Work Order, including writing SIO credentials.
Guides on defining and saving new custom keys to the iCLASS SE Encoder.
Allows secure export of custom and admin keys for backup and recovery.
Guides on changing administrative keys on the device for security purposes.
Sets Reader Configuration Key to authenticate future Configuration cards.
Designed to load media and application keys to one or more encoders.
Introduces the User Config module for managing user records, configurations, and passwords.
Provides instructions for adding a new user with limited access.
Recommends backing up the iCLASS SE Encoder folder for recovery purposes.
Explains how to access and use log files for troubleshooting issues.
Lists common exceptions and error codes with suggested actions for resolution.
To Next Page