HIKVISION DS-7716NXI-I4/16P/4S - Page 170

DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 170
Figure 19-5 Add User
4. In the Add User interface, enter the information for a new user, including User Name, Password, Confirm
(password), User Level (Operator/Guest), and User’s MAC Address.
Strong Password Recommended – We highly recommend that you create a strong password of your
own choosing (using a minimum of eight characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters) in order to
increase the security of your product. We also recommend that you reset your password regularly.
Especially in high security systems, resetting the password monthly or weekly can better protect your
product.
•
User Level: Set the user level to Operator or Guest. Different user levels have different operating
permission.
- Operator: The Operator user level has permission of Two-way Audio in Remote Configuration and
all operating permissions in Camera Configuration by default.
- Guest: A Guest user has no permission of Two-way Audio in Remote Configuration and has only
local/remote playback in the Camera Configuration by default.
•
User’s MAC Address: The MAC address of the remote PC that logs onto the device. If it is configured
and enabled, it allows only a remote user with this MAC address to access the device.
5. Click OK to finish adding the new user account.