HIKVISION DS-7716NXI-I4/16P/4S - Page 172

DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 172
3. Set the user’s Local Configuration, Remote Configuration, and Camera Configuration operating
permissions.
•
Local Configuration
- Local Log Search: Search and view device logs and system information
- Local Parameters Settings: Configure parameters, restore factory default parameters, and
import/export configuration files
- Local Camera Management: Add, delete, and edit IP cameras
•
Local Advanced Operation
- Operate HDD management (initialize HDD, set HDD property)
- Upgrade system firmware
- Clear I/O alarm output
•
Local Shutdown Reboot
- Shut down the device
- Reboot the device
•
Remote Configuration
- Remote Log Search: Remotely view logs saved on the device.
- Remote Parameters Settings: Remotely configure parameters, restore factory default
parameters, and import/export configuration files.
- Remote Camera Management: Remotely add, delete, and edit the IP cameras.
- Remote Serial Port Control: Configure settings for RS-232 and RS-485 ports.
- Remote Video Output Control: Send remote button control signal.
- Two-Way Audio: Realize two-way radio between the remote client and the device.
- Remote Alarm Control: Remotely arm (notify alarm and exception message to the remote client)
and control the alarm output.
- Remote Advanced Operation: Remotely operate HDD management (initialize HDD, set HDD
property), upgrade system firmware, clear I/O alarm output.
- Remote Shutdown/Reboot: Remotely shut down or reboot the device.