DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 175
Figure 19-9 Edit User (Admin)
3. Edit the admin user information as desired, including adding a new admin password (strong password
is required), and MAC address.
4. Edit the admin user account unlock pattern.
1) Check the Enable Unlock Pattern checkbox to enable the use of an unlock pattern when logging in
to the device.
2) Use the mouse to draw a pattern among the nine dots on the screen, and release the mouse when
the pattern is done.
Refer to
Configure Unlock Pattern for Login
for detailed instructions.
To Next Page
Loading...
