DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 36
2. After the time settings, click Next to enter the Network Setup Wizard window.
Figure 2-6 Network Settings
3. Click Next after you configure the network parameters, to take you to the HDD Management window.
Figure 2-7 HDD Management
4. To initialize the HDD, click the Init button. Initialization removes all the data saved in the HDD.
5. Click Next. You enter the Camera Setup interface to add IP cameras.
• Click Search to search for online IP cameras. Before adding a camera, make sure the IP camera to
be added is in active status.
• Click Add to add the camera.
If the camera is in inactive status, select the camera from the list and click Activate to activate it.
To Next Page
Loading...
