DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 66
7. Select the NAS disk from the list shown below, or you can manually enter the directory in the NetHDD
Directory text field.
8. Click OK to complete adding the NAS disk.
Result
Return to the HDD Information menu after adding the NAS disk. The added NetHDD will display on the list.
Adding an IP SAN
1. Go to Storage > Storage Device.
2. Click Add to enter the Custom Add interface.
3. Select NetHDD from the drop-down list.
4. Set the type to IP SAN.
5. Enter the NetHDD IP address in the text field.
6. Click Search to search the available IP SAN disks.
7. Select the IP SAN disk from the list shown.
8. Click OK to complete adding the IP SAN disk.
Up to one IP SAN disk can be added.
Figure 7-2 Add IP SAN Disk
To Next Page
Loading...
