DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 73
1. Go to Storage > Recording Schedule.
2. Select a camera.
3. Check Enable Schedule.
4. Select a Record Type. The record type can be Continuous, Motion Detection, Alarm, Motion | Alarm,
Motion & Alarm, or Event. The recording types are configurable.
•
Continuous: Scheduled recording
•
Event: Recording triggered by all event triggered alarms
•
Motion: Recording triggered by motion detection
•
Alarm: Recording triggered by alarm
•
M/A: Recording triggered by either motion detection or alarm
•
M&A: Recording triggered by motion detection and alarm
•
POS Event: Recording triggered by POS and alarm
5. Select a day and click-and-drag the mouse on the time bar to set the record schedule.
Figure 7-9 Record Schedule
To Next Page
Loading...
