DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 78
You must set the storage mode to Group
before you set the HDD property to Redundancy. For detailed
information, refer to
Configure HDD Group
. There should be at least another HDD in Read/Write status.
1. Go to Storage > Storage Device.
2. Select an HDD from the list and Click to enter the Local HDD Settings interface.
3. Set the HDD property to Redundancy.
Figure 7-12 HDD Property − Redundancy
4. Go to Storage > Schedule Settings > Record Schedule/Capture Schedule.
5. Click Advanced to set the camera recording parameters.
To Next Page
Loading...
