Hill-Rom Basic Care P1440 - Electrical Description

Specifications
Chapter 1: Introduction
Page 1 - 4 Basic Care™ Bed Service Manual (man336)
Table 1-2. Recommended Mattress Dimensions
Table 1-3. Environmental Conditions for Transport and Storage
Table 1-4. Environmental Conditions for Use
Electrical Description
Table 1-5. Electrical Description
Feature Dimension
Mattress width 36" to 37" (91 cm to 94 cm)
Mattress length—standard model 80" to 81" (203 cm to 206 cm)
Mattress length—short model 76" to 77" (193 cm to 196 cm)
Mattress thickness 6" to 7" (15 cm to 18 cm)
Condition Range
Temperature -40°F to 158°F (-40°C to 70°C)
Relative humidity (RH) 10% to 95%
Atmospheric pressure 500 hPa to 1060 hPa
Condition Range
Temperature 50°F to 104°F (10°C to 40°C) ambient tempera-
ture
Relative humidity (RH) 30% to 95%, non-condensing
Atmospheric pressure 700 hPa to 1060 hPa
Condition Range
Rated voltage 100 V AC
110 V AC to 115 V AC
120 V AC to 127 V AC
220 V AC to 230 V AC
240 V AC
Power/Input 100 V AC to 127 V AC—1.0 A
220 V AC to 240 V AC—0.5 A
Frequency 50/60 Hz