Final Actions
Chapter 2: Troubleshooting Procedures
Page 2 - 4 Basic Care™ Bed Service Manual (man336)
Yes No
↓→Replace the brake and steer caster (refer to procedure 4.23 on
page 4-52).
14. If the bed has central brake and steer, put the pedal into the brake position.
Try to move the bed out of its position. The bed does not move.
Yes No
↓→Replace the brake caster (refer to procedure 4.23 on page 4-52).
15. If the bed has individual brake and steer casters, press the brakes on each
caster having that function. Try to move the bed out of its position. The bed
does not move.
Yes No
↓→Replace the casters that are not operating correctly (refer to
procedure 4.25 on page 4-59).
16. If the bed has individual brake and steer casters, press the steer on the
caster having that function. The steer caster locks and all other casters
swivel freely.
Yes No
↓→Replace the steer caster (refer to procedure 4.25 on page 4-59).
17. Call Hill-Rom Technical Support at 1-812-934-1796.
Final Actions
1. Complete the necessary preventive maintenance procedures. See
“Preventive Maintenance Checklist” on page 3-7.
2. Complete all of the necessary administration tasks.
To Next Page
Loading...
