EasyManuals Logo

Hillrom Welch Allyn Connex Spot Monitor Service Manual

Hillrom Welch Allyn Connex Spot Monitor
265 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #97 background imageLoading...
Page #97 background image
Device serial number and model label
The model number and serial number can be found on a label on the back housing.
Serial number and format code
Serial number MMMMXXXXWWYY
MMMM Manufacturing plant
XXXX Sequential number
WW Week of manufacture
YY Year of manufacture
About 4th Edition Service kits
The table describes the components of the device and APM and the associated service kits for
replaceable parts for devices manufactured per IEC60601-1 4th Edition from 2019 and later. To
determine which year your device was manufactured in, refer to the serial number. The year of
manufacture is listed as the last two digits of the serial number.
Future revisions of a part might not always be backwards compatible with a legacy part.
List of 4th edition service kits
To determine the correct replacement part for your unit, always provide the serial number and
model when ordering.
Service Kit
Number
Material
Number
Description
1 105945 Srv Kit CSM, Battery Door
2 Batt22 Srv Kit 2 Cell Lithium-ion Battery
3 105923 Srv Kit CSM, Back Housing*
4 105939 Srv Kit CSM, End Cap
5 105942 Srv Kit CSM, Speaker
6 105920 Srv Kit CSM, NIBP Pump Assembly
7 105933 Srv Kit CSM, Nonin SpO2 PCBA
8 105931 Srv Kit CSM, Masimo SpO2 PCBA
9 105932 Srv Kit CSM, Nellcor SpO2 PCBA
Service manual Field replaceable units 91

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hillrom Welch Allyn Connex Spot Monitor and is the answer not in the manual?

Hillrom Welch Allyn Connex Spot Monitor Specifications

General IconGeneral
BrandHillrom
ModelWelch Allyn Connex Spot Monitor
CategoryMedical Equipment
LanguageEnglish

Related product manuals