Advanced settings
Advanced settings provide access to device settings and service menu information with an access
code. This section covers the following primary tabs:
• General. Settings for system language as well as date and time, plus open source software
disclosure.
• Parameters. Settings for physiological parameters, averaging, and intervals.
• Network. Settings for the internal Ethernet and security, as well as WiFi radio and Bluetooth
subsystems.
• Service. Settings and features that support installation and on-device troubleshooting.
NOTE Changes made in Advanced settings take effect immediately, but they do
not change the configuration file and cannot be used to clone settings from one
device to another. Follow the instructions in "Device configuration and setup" to
create, edit, download, and install any settings you want available on multiple
devices.
Access Advanced settings
NOTE You cannot access Advanced settings if sensors or physiological alarms are
active or if vital sign measurements are displayed.
1. From the Home tab, touch the Settings tab.
2. Touch the Advanced vertical tab.
3. Enter 6345 as the access code and touch OK.
NOTE This access code is configurable and could be different at
your location.
The General tab appears.
4. Perform service tasks by making selections or touching other tabs.
NOTE Service tasks and how to do them are detailed in this section.
5. When you are done, touch Exit.
The Home tab appears.
23
To Next Page
Loading...
Need help?
General
