Hillrom Welch Allyn Connex Spot Monitor Service Manual

Technical Specifications
Ports
Listening Port(s) A single TCP/IP listening port on the EMR (or external
server) needs to be available to receive connections
from multiple devices.
Computer Requirements
NTP Message Frequency The NTP host solution(s) must be capable of processing
time synchronization requests every 36 seconds (see
IDS for calculation details).
Active Directory Message Frequency The host solution(s) must be capable of processing
clinician authentication requests every 36 seconds (see
IDS for calculation details).
Patient Lookup and/or Vitals Send The host solution(s) must be capable of processing
patient lookup requests every 1.2 seconds (see IDS for
calculation details).
Network
Internet Connection An Internet connection may be required depending on
how NTP is configured. If NTP is configured to use an
external time server (e.g., time.nist.gov), then the device
must be able to connect to the Internet.
Device Support
Quantity Some systems may scale up to and potentially beyond
400 devices, depending on the clinical environment.
Device(s) Connex Spot Monitor (CSM) with software version 1.30
or higher
Active Directory setup
Prerequisites:
• Confirm that the Date and Time are set correctly on the device.
NOTE This ensures that the device Date and Time fall between
the Certificate Authority (CA) Root Certificate validity period for
successful connection.
• Load the CA Root Certificate on the device and the Server Certificate on the Active Directory
Server.
Service manual Connex Direct 221

Hillrom Welch Allyn Connex Spot Monitor Specifications

General

Brand	Hillrom
Model	Welch Allyn Connex Spot Monitor
Category	Medical Equipment
Language	English