92
────────────────────────────────────────────────────
7.4 Command
────────────────────────────────────────────────────
Enables and disables the test time.
Syntax
:TIM <data>
data
0: OFF 1: ON
Response
OK Setting completion
Function
Makes ON/OFF settings for the test time, in the READY or SETTING state.
Example
Sets the test time to on.
PC
>
3158
>
:TIM 1
OK Setting completion.
Error
The execution of this command in a state other than the READY and SETTING state
causes an execution error.
Queries the test time.
Syntax
:TIM?
Response
<data>
data
0: OFF 1: ON
Function
Queries the test time.
Example
PC
>
3158
>
:TIM?
1 The test time is on.
:TIM
:TIM?
To Next Page
Loading...
