8.6 Message Reference
132
Query Comparator Judgment Results
(Resistance Measurement)
Syntax
Query
:CALCulate:LIMit:RESistance:RESult?
Response <HI/ IN/ LO/ OFF/ ERR>
Example
Query
:CALC:LIM:RES:RES?
Response
HI
(Voltage Measurement)
Syntax
Query
:CALCulate:LIMit:VOLTage:RESult?
Response <HI/ IN/ LO/ OFF/ ERR>
Set and Query the Comparator Absolute Value Judgment Function
Syntax
Command
:CALCulate:LIMit:ABS <1, 0, ON or OFF>
Query
:CALCulate:LIMit:ABS?
Response <ON or OFF>
ON.............. Absolute value judgment function on
OFF............ Absolute value judgment function off
Note
The absolute value is only taken for measured voltage values.