4.1 Comparator Function
42
5
The Comparator setting display appears.
6
Select the comparator judgment beeper (for this example, HL).
oFF........no beeps sound
HL..........beeps repeatedly (when measurements are Hi or Lo)
in ...........beeps continuously (when measurements are IN)
btH1.......beeps continuously while measurements are within the thresholds (IN), and
beeps repeatedly when measurements are Hi or Lo.
btH2.......beeps once when measurements move into the threshold range (IN), and beeps
repeatedly when measurements go Hi or Lo.
7
Press so that the indicated position blinks, and select the comparator mode (for
this example, Auto).
A............ Auto comparator (default setting)
E ............ Manual comparator
8
Press so that the indicated position blinks, and select resistance.
r .............Resistance
u ............Voltage
To Next Page
Loading...
