Hitachi G1000 - Page 100

Procedure
1. Search for information about the external system port that is connected
to primary system port (CL5-A).
raidcom discover external_storage -port CL5-A -IH0
PORT WWN PM USED Serial# VENDOR_ID
PRODUCT_ID
CL5-A 50060e8007823520 M NO 33333 HITACHI VSP
G1000
2. Display the LU that is defined to external storage system port
(50060e8007823520) that is connected to primary system port (CL5-A).
Check the LU number, and note the value shown in the E_VOL_ID_C field.
raidcom discover lun -port CL5-A -external_wwn 50060e8007823520 -
IH0
PORT WWN LUN VOL_Cap(BLK) PRODUCT_ID
E_VOL_ID_C
CL5-A 50060e8007823520 0 61440000 OPEN-V HITACHI
500308235AAAA
3. Map the LU (0) that is defined to the external storage system port
(50060e8007823520) that is connected to the primary system port (CL5-
A). Specify 1 for the path group ID, and specify 1-1 for the external
volume group number.
raidcom add external_grp -path_grp 1 -external_grp_id 1-1 -port
CL5-A -external_wwn 50060e8007823520 -lun_id 0 -IH0
4. Confirm that asynchronous command processing has completed.
raidcom get command_status -IH0
HANDLE SSB1 SSB2 ERR_CNT Serial# Description
00c3 - - 0 311111 -
5. Search for information about the external system port that is connected
to the secondary system port (CL5-C).
raidcom discover external_storage -port CL5-C -IH1
PORT WWN PM USED Serial# VENDOR_ID
PRODUCT_ID
CL5-C 50060e8007823521 M NO 33333 HITACHI VSP
G1000
6. Display the LU that is defined to external storage system port
(50060e8007823521) that is connected to secondary system port (CL5-
C). Check the LU number, and confirm that the E_VOL_ID_C field displays
the same value as in step 2.
raidcom discover lun -port CL5-C -external_wwn 50060e8007823521 -
IH1
PORT WWN LUN VOL_Cap(BLK) PRODUCT_ID
E_VOL_ID_C
CL5-C 50060e8007823521 0 61440000 OPEN-V HITACHI
500308235AAAA
7. Map the LU (0) that is defined to external storage system port
(50060e8007823521) that is connected to secondary system port (CL5-
C). Specify 1 for the path group ID, and specify 1-2 for the external
volume group number.
raidcom add external_grp -path_grp 1 -external_grp_id 1-2 -port
CL5-C -external_wwn 50060e8007823521 -lun_id 0 -IH1
8. Confirm that asynchronous command processing has completed.
4-20
Configuration and pair management using CCI
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide