Hitachi G1000 - Adding Remote Connections

raidcom get port -IH0
PORT TYPE ATTR SPD LPID FAB CONN SSW SL Serial#
WWN PHY_PORT
(snip)
CL3-A FIBRE MCU AUT E8 N FCAL N 0 311111
50060e80072b6720 -
(snip)
CL4-A FIBRE RCU AUT 97 N FCAL N 0 311111
50060e80072b6730 -
(snip)
2. Display the port information for the secondary system. Confirm that the
port attributes have been changed as intended.
raidcom get port -IH1
PORT TYPE ATTR SPD LPID FAB CONN SSW SL Serial#
WWN PHY_PORT
(snip)
CL3-C FIBRE RCU AUT D6 N FCAL N 0 322222
50060e800756ce22 -
(snip)
CL4-C FIBRE MCU AUT 7C N FCAL N 0 322222
50060e800756ce32 -
(snip)
Adding remote connections
Add bidirectional remote connections between the primary and secondary
storage systems. Specify the same path group ID to the bidirectional remote
connections.
Configuration and pair management using CCI
4-15
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide