Hitachi G1000 - Setting the Reservation Attribute on the S-VOL

Procedure
Reserve the LDEV ID (0x4444) in the resource group (HAGroup1).
raidcom add resource -resource_name HAGroup1 -ldev_id 0x4444 -IH1
Check command and output examples
Display the information about volume (LDEV ID: 0x4444). Confirm that the
number of the resource group in which the LDEV ID was reserved is displayed
for RSGID.
raidcom get ldev -ldev_id 0x4444 -fx -IH1
Serial# : 322222
LDEV : 4444 VIR_LDEV : fffe
SL : -
CL : -
VOL_TYPE : NOT DEFINED
SSID : -
RSGID : 1
Setting the reservation attribute on the S-VOL
When you create a GAD pair, the P-VOL's LDEV ID is set as the virtual LDEV
ID of the S-VOL. Before the pair can be created, the GAD reservation
Configuration and pair management using CCI
4-33
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide