Hitachi G1000 - Configuring the Virtual Storage Machine

12. Ensure that the pair management servers recognize the command
devices, and then from Configure Pair Management Server, click
Refresh Hosts.
Result
The command devices for the primary and secondary pair management
servers are allocated, and pair management server information is current,
and can be confirmed by clicking Show Details.
Related topics
•
About global-active device setup on page 5-2
Configuring the virtual storage machine
To support global-active device pairs, add secondary storage system
resources to the default or user-defined virtual storage machine on the
primary storage system. Configuring the virtual storage machine provides a
single view of the primary and secondary storage system resources.
Prerequisites
The primary and secondary storage systems have been selected in the Set
up Global-Active Device window.
Procedure
1. Open the global-active device setup window:
¢
From the Actions menu, select Set up Global-Active Device
¢
On the Replication tab, General Tasks, select Set up Global-
Active Device
2. From Configure Virtual Storage Machine, click Edit Virtual Storage
Machine.
3. In the Edit Virtual Storage Machine dialog box, on the Storage
Systems tab, verify that the displayed Name and Virtual Model and
Serial No. show the primary storage system values and that the primary
storage system is listed.
4. Click Add Storage Systems, select the secondary storage system, and
then click OK.
5. Add secondary storage system resources, such as Parity Groups, LDEV
IDs, Storage Ports and Host Group Numbers to the virtual storage
machine by clicking the respective tabs.
Note:
The primary storage system resources already belong to the virtual
storage machine.
Using Hitachi Command Suite to set up global-active device
5-9
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide