Hitachi G1000 - Correspondence between GUI operations and CCI commands

Correspondence between GUI operations and CCI
commands
The following tables show the correspondence between CCI commands and
Device Manager - Storage Navigator operations.
Table A-1 Correspondence between GUI operations and CCI commands:
configuration operations
Operation
GUI CCI
Supported? Supported? Command
Edit Ports Yes Yes raidcom modify port
Add Remote Connection Yes Yes raidcom add rcu
Select external path
groups
Yes Yes raidcom add
external_grp
Create external volumes Yes Yes raidcom add ldev
Add Quorum Disks Yes Yes raidcom modify ldev
Create virtual storage
machines (resource
groups)
Yes Yes raidcom add resource
Reserve host group IDs No Yes raidcom add resource
Delete virtual LDEV IDs Yes Yes raidcom unmap resource
Reserve LDEV IDs Yes Yes raidcom add resource
Assign GAD Reserves Yes Yes raidcom map resource
Create Host Groups Yes Yes raidcom add host_grp
Create Pools Yes Yes raidcom add dp_pool
Create virtual volumes Yes Yes raidcom add ldev
Add LU Paths Yes Yes raidcom add lun
Table A-2 Correspondence between GUI operations and CCI commands:
pair operations
Operation Parameter
GUI CCI
Supporte
d?
Supporte
d?
Command Option
Create GAD
Pairs
Fence Level No* Yes paircreate -f never
Copy Pace Yes Yes paircreate -c <size>
No initial copy Yes Yes paircreate -nocopy
Suspend Pairs P-VOL
specification
Yes Yes pairsplit -r
A-2
Correspondence between GUI operations and CLI commands
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide