2. If necessary, set the host mode for the new host group (Windows host
mode shown).
raidcom modify host_grp -port CL1-C-1 -host_mode WIN -IH1
3. Reserve host group (CL1-C-1) to resource group 1. For instructions, see
Reserving a host group ID on page 4-29.
Check command and output examples
Display the information about the host group that is set for port (CL1-C).
Confirm that the port name, host group ID, and host group name are correct.
raidcom get host_grp -port CL1-C -IH1
PORT GID GROUP_NAME Serial# HMD
HMO_BITs
CL1-C 0 1C-G00 322222 WIN
CL1-C 1 HAVol 322222 WIN
Related topics
• Reserving a host group ID on page 4-29
Creating a pool
After creating host groups, you need to create a pool volume, format the
volume, and create a Dynamic Provisioning pool.
4-36
Configuration and pair management using CCI
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide
To Next Page
Loading...
