Hitachi G1000 - Page 117

Procedure
1. Specify a parity group (13-4) to create a volume (pool volume) whose
LDEV ID is 0x7777. The capacity is 100 GB.
raidcom add ldev -ldev_id 0x7777 -parity_grp_id 13-4 -capacity
100G -IH1
2. Confirm that asynchronous command processing has completed.
raidcom get command_status -IH1
HANDLE SSB1 SSB2 ERR_CNT Serial# Description
00c3 - - 0 322222 -
3. Perform Quick Format to the volume (0x7777).
raidcom initialize ldev -operation qfmt -ldev_id 0x7777 -IH1
4. Confirm that asynchronous command processing has completed.
raidcom get command_status -IH1
HANDLE SSB1 SSB2 ERR_CNT Serial# Description
00c3 - - 0 322222 -
5. Specify 0x7777 to the pool volume to create a pool for Dynamic
Provisioning whose pool ID is 0 and whose pool name is HA_POOL.
raidcom add dp_pool -pool_id 0 -pool_name HA_POOL -ldev_id
0x7777 -IH1
6. Confirm that asynchronous command processing has completed.
Configuration and pair management using CCI
4-37
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide